Chemco · Baby Care & Hygiene contract manufacturing

Baby Care & Hygiene Portfolio

Feeding bottles, teats, soothers, sippers, breastfeeding products, accessories, toys and menstrual hygiene. Manufactured in India by Chemco for over 45 years.

Explore the portfolioTalk to us
  • US FDARegistered facility
  • ISO 13485Medical device quality system
  • BISLicensed bottles, teats and toys
  • CDSCOLicensed breast pumps
Baby sitting on a bed holding a feeding bottle
45+years of Baby Care & Hygiene manufacturing

Annual output

Built for scale

India’s largest manufacturer of baby feeding bottles, teats, pacifiers, soothers and breast pumps: four decades of moulding feeding and soothing products, at volumes brands can plan around.

YEARS OF EXPERIENCE45+
30,000,000+
Bottles annually
40,000,000+
Teats annually
25,000,000+
Pacifiers annually
7,000,000+
Breast pumps annually

Quality and compliance

Certified where it counts

The Baby Care & Hygiene facility runs a medical-device quality system, is registered with the US FDA and holds the Indian licences that feeding bottles, teats, toys and breast pumps require. Every batch is documented and traceable, and every shipment leaves with a Certificate of Analysis.

  • ISO 13485:2016Medical devices quality management, for the design and manufacture of breast pumps and menstrual cups
  • ISO 9001:2015Quality management system, certified by TÜV NORD
  • ISO 15378:2017Primary packaging materials for medicinal products
  • US FDARegistered facility
  • GMPGood Manufacturing Practice certified
  • FSSC 22000Food safety system certification
  • SEDEXAudited and approved for responsible supply chains
  • ISO/TC 338Member of the ISO technical committee writing the worldwide standard for menstrual cups

Bureau of Indian Standards

The only company in India with BIS licences for plastic and glass baby feeding bottles and for teats

Chemco was the first company in India to obtain the IS 3565 licence for teats, and its products carry the ISI mark under these licences:

  • IS 14625Plastic feeding bottlesCM/L 0007357581
  • IS 5168Glass feeding bottlesCM/L 7800056717
  • IS 3565Teats for feeding bottlesCM/L 7100007582
  • IS 9873 (Part 1)Safety of toysCM/L 7100129798

Chemco sits on the BIS PCD 21, PCD 13, PGD 38 and MHD 03 technical committees, helping to formulate the standards for the baby care industry, and is prepared for the anticipated mandatory BIS marking of pacifiers, soothers, sippers and breast pumps.

Central Drugs Standard Control Organisation

The only company in India with CDSCO licences for both manual and electric breast pumps

Breast pumps are manufactured under the Medical Devices Rules, 2017, so safety, quality and performance requirements are met before a product reaches the market and it can be sold and distributed legally across India.

  • CDSCOManufacturing licence, medical devicesMFG/MD/2022/000639

Manufacturing and quality systems, labelling, packaging and documentation follow CDSCO requirements, with compliance monitored and documented on a continuing basis. Together with ISO 13485:2016 certification, this gives healthcare professionals, retailers and parents a licensed and audited source for breast pumps.

The portfolio

Explore by category

Every product here is available for private label and contract manufacturing. Tap a category to jump to it.

Feeding Bottles

Nipples / Teats

Pacifiers & Soothers

LSR Products

SSR Products

Sippers & Tumblers

Breastfeeding Products

Accessories

Toys

Menstrual Hygiene

Feeding Bottles category photograph

Baby Care & Hygiene portfolio

Feeding Bottles

PP, PPSU, glass and steel bottles in wide-neck and standard-neck formats, from 60 ml to 330 ml.

PP and PPSU feeding bottles with measurement scales

PP and PPSU Feeding Bottles

Wide neck
150 ml250 ml330 ml
Standard neck
60 ml125 ml250 ml
Glass feeding bottles with silicone teats

Glass Feeding Bottles

Wide neck
150 ml250 ml
Standard neck
60 ml125 ml250 ml
Stainless steel feeding bottles with cap

Steel Feeding Bottles

Wide neck
120 ml240 ml
Standard neck
150 ml250 ml

Available flow options

Flow options for every stage

Slow, medium and fast teats plus X-cut and Y-cut variants, each shown with the age it suits.

  • Slow0+ months
  • Medium3+ months
  • Fast6+ months
  • X cut0+ months
  • Y cut2+ months
Nipples / Teats category photograph

Baby Care & Hygiene portfolio

Nipples / Teats

Round and orthodontic teats for standard-neck and wide-neck bottles, in slow, medium, fast, X-cut and Y-cut flows.

Standard neck round silicone teat

Round Nipple / Teat

Standard neck

A fully round tip ensures the correct mouth position and is seen as the most natural option. Fits standard and wide-neck bottles.

Standard neck orthodontic silicone teat

Orthodontic Nipple / Teat

Standard neck

The flattened shape mimics breastfeeding and adapts to the baby’s mouth. Suitable for all bottle types.

Wide neck round silicone teat

Round Nipple / Teat

Wide neck

A fully round tip ensures the correct mouth position and is seen as the most natural option. Fits standard and wide-neck bottles.

Wide neck orthodontic silicone teat

Orthodontic Nipple / Teat

Wide neck

The flattened shape mimics breastfeeding and adapts to the baby’s mouth. Suitable for all bottle types.

Available flow options

Flow options for every stage

Slow, medium and fast teats plus X-cut and Y-cut variants, each shown with the age it suits.

  • Slow0+ months
  • Medium3+ months
  • Fast6+ months
  • X cut0+ months
  • Y cut2+ months
Pacifiers & Soothers category photograph

Baby Care & Hygiene portfolio

Pacifiers & Soothers

Soother formats: capped, orthodontic, round and symmetrical.

Pink soother with a protective cap

Soother with Cap

Comes with a protective cap that keeps the teat hygienic and safe when not in use.

Green orthodontic pacifier

Orthodontic Pacifier

Specially contoured to reduce jaw pressure, supporting healthy oral development and natural tongue movement.

Teal round soother

Soother (Round)

Closely mimics the shape of the mother’s nipple, encouraging natural sucking and allowing comfort in any position.

Blue symmetrical soother

Soother (Symmetrical)

Flattened on both sides, the symmetrical soother sits correctly in the mouth at all times, reducing strain on teeth and gums.

LSR Products category photograph

Baby Care & Hygiene portfolio

LSR ProductsLiquid silicone rubber

Liquid silicone rubber spouts and straws for sippers and training cups.

Clear liquid silicone spout

LSR Spouts

Soft yet durable, the silicone spout promotes easy sipping while being gentle on developing gums and teeth.

Silicone straw with a weighted ball

Straw with Weighted Ball

Designed to follow the liquid at any angle, the weighted straw ensures uninterrupted sipping for active little ones.

Clear liquid silicone sipper straw

LSR Sipper Straw

Soft and bite-resistant, the silicone sipper straw offers a safe and gentle drinking experience for growing toddlers.

SSR Products category photograph

Baby Care & Hygiene portfolio

SSR ProductsSolid silicone rubber

Solid silicone rubber handles, sleeves, bibs and teethers.

Yellow and green silicone bottle handles

Bottle Handles

Ergonomically designed handles offer a secure grip, promoting independent bottle feeding for growing infants.

Coloured silicone bottle sleeves

Bottle Sleeves

Protective silicone sleeves enhance grip and insulation, safeguarding bottles against slips and temperature fluctuations.

Pastel silicone bibs

Bibs

Soft, absorbent bibs provide reliable protection against spills and dribbles, keeping your baby comfortably clean throughout feeding.

Elephant and whale silicone teethers

Teethers

Safe, soothing teethers support oral development while relieving discomfort during teething with gentle textured surfaces.

Sippers & Tumblers category photograph

Baby Care & Hygiene portfolio

Sippers & Tumblers

Spill-resistant sippers, tumblers and training sets for the move from bottle to cup.

Colourful sippers with handles and straws

Sippers

Spill-resistant sippers support a smooth transition from bottle to sipper, with ergonomic designs tailored for little hands.

Teal and green baby tumblers

Tumblers

Lightweight and durable, baby tumblers encourage confident self-drinking with easy-grip shapes and soft spouts.

Training cup set with interchangeable spouts

Cups & Training Sets

A complete weaning solution: the training set fosters independent feeding with coordinated utensils designed for tiny learners.

Breastfeeding Products category photograph

Baby Care & Hygiene portfolio

Breastfeeding Products

Manual breast pumps, milk storage containers and LSR nipple shields.

Manual breast pump

Manual Breast Pumps

Efficient and gentle, our breast pump ensures discreet milk expression with optimal comfort and convenience for mothers.

Milk storage container with blue cap

Milk Storage Containers

Leak-proof and freezer-safe, these containers preserve expressed milk securely while maintaining hygiene and freshness.

Clear silicone nipple shield

LSR Nipple Shield

Ultra-soft and flexible, the silicone nipple shield offers a comfortable breastfeeding experience while aiding latch and flow.

Accessories category photograph

Baby Care & Hygiene portfolio

Accessories

Bowls, fruit feeders, drying racks and sterilisers for feeding and hygiene.

Silicone bowls with a spoon

Bowl with Spoon

Ergonomically crafted for tiny hands and mouths, the bowl and spoon set supports mess-free, independent feeding.

Blue and green fruit feeder

Fruit Feeder

A safe introduction to solids, the fruit feeder allows babies to explore fresh flavours while reducing choking risks.

Bottle drying rack with bottles and teats

Bottle Drying Rack

Designed for organised air-drying, the rack keeps bottles and components upright, clean and ready for the next feed.

Electric bottle steriliser

Steriliser

Effectively eliminates harmful bacteria, ensuring bottles and accessories remain hygienically clean and baby-safe.

Toys category photograph

Baby Care & Hygiene portfolio

Toys

Water-filled teethers and rattles for sensory play and teething relief.

Strawberry, blue and yellow water-filled teethers

Water-Filled Teethers

Gently chilled for soothing relief, water-filled teethers help ease teething discomfort while encouraging healthy oral development.

Colourful key and ring rattles

Rattles

Lightweight and engaging, rattles stimulate sensory exploration and motor skills with safe, easy-to-hold designs for little hands.

Menstrual Hygiene category photograph

Baby Care & Hygiene portfolio

Menstrual HygieneMenstrual cups

Menstrual cups in small, medium and large sizes, plus a steriliser.

Small pink menstrual cup

Small (15 ml)

Easy to insert and ideal for first-time users; recommended for teenagers and those under 18.

Medium white menstrual cup

Medium (20 ml)

Designed for women under 30 with moderate flow, combining comfort with reliable capacity.

Large purple menstrual cup

Large (30 ml)

Ideal for women over 30, after childbirth, or with heavy flow.

Pink collapsible cup steriliser

Steriliser

For quick, effective sterilisation, keeping the cup clean, safe and ready for reuse.

Manufacturing capability

Inside the Baby Care & Hygiene facility

The portfolio is manufactured in a fully air-conditioned plant where moulding, printing and packing run as one closed loop, with design, tooling and testing in-house. Here is how it works, from the raw material store to the loading bay.

Gowned operators packing bottles in the clean room

Clean-room production, closed loop

Bottles, teats and soothers are moulded, printed and packed in one closed loop inside Class 10,000 clean rooms. HEPA and ULPA filtration removes microscopic contaminants, temperature and humidity are regulated, air curtains guard every entry and exit, and access is restricted to gowned staff. Line clearance between jobs makes sure nothing from a previous run remains.

  • Class 10,000 clean rooms
  • HEPA and ULPA filtration
  • Closed-loop production, printing and packing
  • Fully air-conditioned
  • Temperature and humidity control
  • Air curtains at every entry
  • Gowned, restricted access
  • Line clearance between jobs
  • Automated conveyors
  • Epoxy flooring
Moulding hall with insulated pipework and no operators on the floor

A machine hall that runs without people on the floor

The moulding area is a clean-room enclosure with no human presence. Process parameters are password-protected, every machine is monitored remotely through ShotScope NX and IoT dashboards that can be viewed anywhere in the world, and an alarm system brings an engineer in the moment a process drifts. Raw material reaches the machines through a closed delivery system, so no bags are opened on the floor.

  • No human presence in the machine area
  • Password-protected process parameters
  • ShotScope NX remote monitoring
  • Real-time production data, viewable anywhere
  • Closed material delivery, no raw-material bags
  • Alarm system with engineer response
  • Shot-count and timed-zone conveyors
  • Soft-drop systems
  • Insulated pipework and efficient HVAC
  • Fire suppression and spill containment
ASB Nissei injection stretch blow moulding machine

Machines from Japan and Germany, tooling in-house

Injection and stretch blow moulding machines from ASB Nissei, Arburg, Dr. Boy, Klöckner DESMA, Toshiba, Ferromatik and Krauss Maffei run multi-cavity moulds built with toolmakers in Germany and Taiwan. An in-house tool room and mould workshop looks after hot and cold runners, tracks every mould with counters, audits and services it on schedule, and validates it with trials before it goes into production. Bottle necks come standard, wide or customised; teats are tailored by shape, size, flow rate and hardness; accessories, venting systems, gears, caps, spoons and spouts are made to a customer’s design.

  • ASB Nissei, Arburg, Dr. Boy, Klöckner DESMA
  • Toshiba, Ferromatik, Krauss Maffei
  • Multi-cavity moulds
  • Toolmakers in Germany and Taiwan
  • In-house tool room and mould workshop
  • Hot and cold runner maintenance
  • Mould counters and tracking
  • Trials and validation before production
  • Standard, wide and customised necks
  • Teats tailored by shape, size, flow and hardness
Testing instruments in the quality control laboratory

An in-house laboratory and QA/QC around the clock

Every incoming raw material is tested against its specification before it is released, and in-process checks follow BIS and EN standards. Teats are 100% airflow tested and measured for water flow rate with a proprietary method, pacifiers go through automated push-pull testing, and secondary and tertiary packaging is tested too. Test equipment is calibrated and checked with Gage R&R studies, and every batch is documented and traceable.

  • In-house approved laboratory
  • Incoming raw-material testing
  • In-process checks to BIS and EN standards
  • QA/QC teams round the clock
  • 100% airflow testing of teats
  • Proprietary water-flow-rate test for teats
  • Automated push-pull testing of pacifiers
  • UV and heat sterilisation
  • Calibration and Gage R&R studies
  • Batch documentation and traceability
  • Packaging tests
  • Certificate of Analysis with every shipment
Printed polypropylene feeding bottle

Printing, decoration and assembly under one roof

Automatic screen and pad printing with UV- and IR-cured, strictly food-grade inks decorates PP, PES, glass and stainless steel bottles as well as pacifiers and cups. Sleeving, laser engraving, ultrasonic and spin welding, blister sealing and labelling happen in the same closed loop, so a finished, retail-ready product leaves the clean room. India’s largest pacifier set-up makes single-piece silicone pacifiers and multi-piece pacifiers joined by ultrasonic welding.

  • Automatic screen and pad printing
  • UV and IR curing, food-grade inks
  • PP, PES, glass and stainless steel
  • Stretch and shrink sleeving
  • Laser engraving
  • Ultrasonic welding
  • Spin welding for insulated bottles and cups
  • Glow-in-the-dark pacifiers, teethers and toys
  • Blister sealing
  • Labelling and barcoding
  • Smart packaging
Design team testing feeding bottles at the development bench

From idea to commercial production, all executed by Chemco

An in-house design department takes a brief through design, virtual testing, prototyping and 3D printing, sample production, commercial production and later modifications. Technical tie-ups with multinational companies, localisation suggestions and their implementation, biodegradable secondary and tertiary packaging, and continuing research into airflow and water-flow test methods for teats keep the portfolio moving with consumer demand and regulation.

  • In-house design department
  • Design, virtual testing, prototyping
  • 3D printing and prototyping
  • Sample runs to commercial production
  • Technical tie-ups with multinationals
  • Localisation suggestions and implementation
  • Biodegradable secondary and tertiary packaging
  • Viability and cost studies
  • Research on teat test methods
  • Partnerships with start-ups
  • Market insights shared with clients
Palletised cartons being loaded for dispatch

Storage and dispatch with full traceability

Polymers rest in insulated, dust-free storage and liquid silicone rubber in air-conditioned stores, palletised and issued first in, first out, with barcoding for 100% traceability. Before a shipment leaves it is inspected, photographed before, during and after loading, and accompanied by a Certificate of Analysis, with drivers and transporters trained for the cargo. SAP S/4HANA runs across the organisation, so every order, batch and shipment is on one system.

  • Insulated, dust-free polymer storage
  • Air-conditioned LSR storage
  • First in, first out
  • Pallets throughout
  • Barcoding, 100% traceability
  • Pre-dispatch inspection
  • Certificate of Analysis with every shipment
  • Loading photographs
  • Trained drivers and transporters
  • SAP S/4HANA across the organisation

Contact

Talk to us about your next product

For contract manufacturing enquiries, message Rasesh or Gaurav directly on WhatsApp, or reach the head office in Mumbai.

Rasesh Ghanshyam Tanna

Business Head

WhatsApp Rasesh Save contact
rgt@chemcogroup.com

Head office

Chemco House, 6th Floor,
D Sukhadwala Road,
Fort, Mumbai 400001, India